Bring every robot to the frog_v11-flat configuration (Fusion v19, Robobot folder). Click a cell to cycle: ? unchecked → ✓ matches v11 → ✗ needs work → – not fitted.
Print queue
Counts every ✗ in the printed-parts columns × the quantity per robot.
From the model
Superseded, hidden in v11: old camera-arc, servo_mount_frog_flat (replaced by servo-lidar-mount), side-down, horizontal-right, cable-fork, cable_support, line-sensor-mount and line-sensor-shade. Pull these off robots that still carry them.
New this week: camera-arc v3 and camera-cover (26 Oct 2026). Every robot needs these unless printed after that date.
Pi model: the assembly still contains a Pi3+ body, not a Pi 4 or Pi 5. The Pi 5 has its USB and Ethernet ports swapped compared with the Pi 4, needs a 5 V / 5 A supply, and its active cooler adds height. Test-fit one Pi 5 in the box and lid before printing 25.
Software split: Pi 4 robots run Ubuntu 22.04 + Humble natively. Ubuntu 22.04 does not support the Pi 5, so Pi 5 robots need Ubuntu 24.04 + Jazzy, or Humble in Docker. Until every robot is on a Pi 5 you will run two images; pick the Pi 5 route before flashing.
Model health: joint Rigid 39 has two lost references and solves from cached geometry.
?unchecked✓matches v11✗needs work–not fittedBatteries column shows the count in the box: 2 / 1 / 0